কোম্পানির ব্লগ সম্পর্কে Mingjiada Electronics Supply TI TCAN1462: Automotive CAN FD Transceiver, Supporting SIC Signal Enhancement

Shenzhen Mingjiada Electronics Co., Ltd. — supplies the TI TCAN1462 series of high-speed Controller Area Network (CAN) transceivers. This series supports CAN FD data rates of up to 8 Mbps and integrates Signal Improvement Capability (SIC), which helps engineers reduce bus ringing and improve signal eye diagrams. It is designed for applications with continuously increasing data volumes, such as automotive gateways, ADAS, body control systems, and hybrid/all-electric powertrains.

I. What is the TCAN1462?

The TCAN1462 is a high-speed Controller Area Network (CAN) transceiver launched by TI. The automotive-grade model, TCAN1462-Q1, is certified to AEC-Q100 Grade 1, complies with the ISO 11898-2:2016 physical layer specification, and supports CiA 601-4 SIC (Signal Improvement Capability). The TCAN1462 is compatible with both traditional CAN and CAN FD, with a maximum signalling rate of 8 Mbps, making it suitable for transitional designs upgrading from traditional vehicle body networks to high-performance in-vehicle communication.

II. Key Parameters of the TCAN1462 at a Glance

Type: High-speed CAN / CAN FD / CAN SIC transceiver

Maximum data rate: 8 Mbps

Bus fault protection: ±58 V

Supply voltage (VCC): 4.5 V – 5.5 V

VIO logic level: 1.7 V – 5.5 V

Operating temperature: –40°C to +125°C

Operating modes: Normal mode, low-power standby, remote wake-up

Protection functions: TXD dominant timeout, thermal shutdown, under-voltage protection, IEC ESD

III. Key Features of the TCAN1462:

Supports traditional CAN and CAN FD (up to 8 Mbps)

Actively improves bus signals by reducing ringing in complex topologies

Backwards compatible for use in traditional CAN networks

VIO level conversion support: 1.7V to 5.5V

Operating Modes

Normal Mode

Low-power standby mode supporting remote wake-up requests

Passive behaviour when unpowered

Bus and logic terminals are in a high-impedance state (no load on the running bus or application)

Supports hot-swapping: ensures interference-free operation during power-up and power-down on the bus and RXD outputs

Defines device behaviour for floating logic pins and power supply undervoltage conditions

IV. Typical Applications for the TCAN1462

Automotive gateways

Advanced Driver Assistance Systems (ADAS)

Body electronics and lighting

Hybrid, electric and powertrain systems

Automotive infotainment systems and instrument clusters

The TCAN1462-Q1 is an automotive-grade CAN FD transceiver designed for automotive electronics and CAN FD networks. It complies with the ISO 11898-2:2016 physical layer standard, supports CAN FD data rates of up to 8 Mbps, and integrates Signal Improvement Capability (SIC) to help engineers reduce bus ringing and improve signal eye diagrams. It is suitable for applications such as ADAS, domain controllers, automotive gateways, body control, battery management systems and industrial CAN FD communications.

Mingjiada Electronics supplies the TI TCAN1462 high-speed CAN FD transceiver, supporting the selection and procurement of automotive-grade CAN FD applications. If you require the TCAN1462 datasheet, information on stock availability, sample requests, bulk quotations or BOM fulfilment, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.

Tags: TCAN1462VDRBRQ1, TCAN1462VDRBRQ, TCAN1462VDRBR, TCAN1462VDRB, TCAN1462VDR, TCAN1462VD, TCAN1462V, TCAN1462