কোম্পানির ব্লগ সম্পর্কে Mingjiada Supply And Recycle ADI ADIS16477 Precision Miniature MEMS Inertial Measurement Unit (IMU)

Mingjiada Supply And Recycle ADI ADIS16477 Precision Miniature MEMS Inertial Measurement Unit (IMU)

Mingjiada Electronics supplies and recycles the ADI ADIS16477: a precision, miniature MEMS IMU suitable for drone flight control and inertial navigation

In drones, robots, industrial navigation and platform stabilisation systems, MEMS inertial measurement units (IMUs) are among the core components that determine the accuracy of attitude estimation, motion control and navigation. As a precision, miniature MEMS IMU, the ADI ADIS16477 is widely used in applications with stringent requirements for both size and performance, thanks to its high stability, low noise and factory calibration. Mingjiada Electronics has long provided supply and recycling services for electronic components from brands such as ADI, and can assist customers with spot purchases, batch verification and stock recycling of the ADIS16477.

ADIS16477 Product Overview

The ADIS16477 is a precision, miniature MEMS inertial measurement unit (IMU) that integrates a three-axis gyroscope and a three-axis accelerometer. Each inertial sensor integrated into the ADIS16477 incorporates signal conditioning technology to optimise dynamic performance. Factory calibration is performed for each sensor’s sensitivity, bias, alignment, linear acceleration (gyro bias) and impact point (accelerometer position). Consequently, each sensor has dynamic compensation equations that ensure accurate sensor measurements under a variety of conditions.

ADIS16477 Key Features

Three-axis digital gyroscope

Models with ranges of ±125°/s, ±500°/s and ±2000°/s

In-motion bias stability: 2°/hour (ADIS16477-1)

Angular random walk: 0.15°/√hour (ADIS16477-1 and ADIS16477-2)

±0.1° axis-to-axis alignment error

Three-axis digital accelerometer, ±40 g

Offset stability whilst in motion: 13 μg

Three-axis angular rate and velocity outputs

Factory-calibrated sensitivity, offset and alignment

Calibration temperature range: −40 °C to +85 °C

SPI-compatible data communication

Programmable operation and control

Automatic and manual bias correction control

Data-ready indication for synchronised data acquisition

External synchronisation modes: direct, pulse, adjustment and output

On-demand self-test for inertial sensors

On-demand self-test for flash memory

Single-supply operation (VDD): 3.0 V to 3.6 V

Mechanical shock resistance: 2000 g

Operating temperature range: −40°C to +105°C

ADIS16477 Typical Applications

Navigation, stabilisation and instrumentation

Drones and autonomous vehicles

Smart agricultural and construction machinery

Factory and industrial automation, robotics

Virtual and augmented reality

Sports IoT

Why Choose the ADIS16477 for Drones and Autonomous Platforms

Integrated 6-axis design reduces flight control wiring complexity: Three-axis gyroscopes and three-axis accelerometers are integrated into a single package, outputting delta angle and delta velocity, facilitating direct integration with attitude filtering and INS/EKF systems.

Factory calibration minimises user calibration: Sensitivity, bias, axis alignment and linear acceleration coupling are all compensated for at the factory, reducing the time required for inertial navigation system alignment during small-batch trial production of drones.

Multiple measurement ranges to suit various aircraft types: ±125°/s is suitable for low-speed stabilised gimbals and small indoor drones; ±500°/s is suitable for general-purpose multirotors; ±2000°/s is suitable for high-speed manoeuvrable aircraft, fixed-wing aircraft or impact test vehicles.

SPI + data-ready pin facilitates synchronised sampling: DR signals, when used in conjunction with external synchronisation mode, can be time-aligned with GPS, magnetic compasses and the flight controller’s clock.

Wide temperature range and shock resistance: Operating temperature range of −40 to +105 °C and 2,000 g shock survival, making it suitable for high-altitude environments, low-temperature logistics drones, agricultural drones and industrial inspection robots.

Mingjiada Electronics has long provided supply and recycling services for the ADI ADIS16477 | Precision, Miniature MEMS Inertial Measurement Unit (IMU), helping customers meet their spot procurement and inventory management needs. For ADIS16477 quotations, spot stock enquiries or recycling assessments, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further details on supply and demand.

Tags: ADIS16477-2BMLZ, ADIS16477-2BML, ADIS16477-2BM, ADIS16477-2B, ADIS16477-2, ADIS16477